Tools and accessories that help a DIY solar install go smoother—the same kind of gear we used around our EG4-based home system. This is not a substitute for a licensed electrician or your local code.
As an Amazon Associate I earn from qualifying purchases. Some Signature Solar links are affiliate links too.
Meters and safe checks
- Fluke 117 true-RMS multimeter — Checks AC/DC voltage before you trust a circuit or inverter reading.
- Klein NCVT-3P non-contact voltage tester — A quick pocket check for live wires without touching conductors.
- P3 Kill A Watt P4400 — Measures real appliance watts for battery and inverter planning.
Connectors and wiring helpers
- IWISS MC4 solar connector kit — Crimpers and dies for common solar panel MC4 connectors.
- Kasa Smart Plug EP10 — Schedules outlets so vampire loads stop sipping overnight.
EG4-class gear (Signature Solar)
These are the same Signature Solar links already used on this site for our DIY journey:
- EG4 3000 Watt Off Grid Inverter — All-in-one inverter we started with for off-grid backup.
- EG4-LL 48V 100Ah battery — Server-rack battery option for longer runtime.
- EG4 Brightmount rack — Ground-mount rack kit for panel arrays.
- 400W Canadian Solar panel — Panel option we researched for the array.
- 100ft 10 AWG copper PV wire — Real copper PV wire for array runs.
- IMO DC disconnect — Isolator switch for shutting down the array safely.
Related reading
See our DIY solar install (2024), the EG4 3000 EHV review, EG4 breaker trip notes, and the solar math cheat sheet. Video walkthroughs live on YouTube.
Pages of Wisdom — plain-English solar for real life.
